ERROR light is off, but nothing is printing

Try to run the self test to check that the printer works properly.


Running the self test -


1. Make sure the printer is turned off and the printer covers are
 
closed properly.

 
2. While holding down the FEED button, turn on the printer using
 
the switch on the front of the printer to begin the self test. The
 
self test prints the printer settings and then prints the
 
following, cuts the paper, and pauses. (The PAPER OUT light
 
blinks.)


3. Press the FEED button to continue printing. The printer prints a
 
pattern using the built-in character set.
 
4. The self test automatically ends and cuts the paper after
 
printing the following:

The printer is ready to receive data as soon as it completes the self
 
test.

Note:
 
If you want to pause the self test manually, press the FEED
 
button. Press the FEED button again to continue the self test.
 
Self test printing.
 
*** completed ***
 
following, cuts the paper, and pauses.